PV Gap

Floyd Said:

Where loose Solar Cells are available in India?

We Answered:

Calcutta.

Rosemary Said:

I want to start a solar cell testing centre in india, how can i proceed ?

We Answered:

If you do this without much knowledge of the industry (your own self assessment) one of your biggest problems will be to get customers. Very likely you will "die" from lack of cash flow!

The classical way to handle this is to enter the (in your case) solar cell industry either in manufacturing or with a major long term user and work on most if not all of - research, technical design, manufacturing, testing and application of the technology. Build up your knowledge and, perhaps more important, your contacts over a few years until you are well known to some potential clients who might outsource testing and that you have thereby established a pretty secure potential customer base you can "take with you". Then start your test centre. This of course assumes that you have meanwhile carefully checked that an independent external test facility is a commercially viable entity.

Warren Said:

where can i buy individual solar cells in india?

We Answered:

www.PhotonSolar.com
www.PhotonSolar.com
hope this will help

VLADIMIR KARASEV said:

Dear Sirs\ Mis, our company is interested in quickly attracting venture funding to finish work on the technology of production of solar modules with high efficiency. request for funding and in the annex to the letter the results of our work in the form of a report We offer more detailed information on our company and demand for grant capital funding in the amount of - $ 3000 000. CONSTRUCTION TECHNOLOGY - technology perfected laboratory, to manufacture industrial design and conduct an independent test. REQUIRED AMOUNT OF VENTURE FINANCING - $ 3000 000. The additional informationFinancing term - 18 months. Return of the investor - in the course 10 days after the expiration of funding. PROPOSAL FOR COOPERATION for venture investors After production of the industrial design and an independent test, we propose % Of revenue from the sale of technology. COMMERCIALIZATION developed technology. Our technology has a wide range of potential buyers. This technology allows all companies to manufacturers of solar modules very easy to integrate our technology into an existing, technological complex. It is planned to implement the technology on a territorial basis -- right to the technology will be limited to use by the buyer on the Territories and obemu release. INFORMATION TECHNOLOGY At present the main trends in development by improving the efficiency of photo electric plates in the application of new non-silicon materials. So a few days ago, the Japanese company Sharp after 9 years of work reported the creation of a prototype battery that runs without a hub, but the efficiency of which is 35,8%. New uses for electricity generation several photo-absorbing layers, united among themselves. The substrate is made of battery connections on the basis of indium and gallium. The properties provided by the battery is quite close to those used in the aerospace industry. Talking about the mass use will not have developers in the coming years to address issues of cost reduction and a number of technological problems. Our company has gone a different way: 1. We left a substrate of mono silicon. 2. on the surface of the substrate of mono silicon, we have consistently strike a few layers of thickness 50-100 nano meter (materials that are applied is our know-how) -- * Main layer of nano-size mono atomic amorphous silicon, is a very active state of amorphous silicon. In this layer, the speed of motion of electrons is several times higher than the standard Cell-based silicon. And as this layer is able to convert into electrical energy is not only the visible part of the spectrum of sunlight and ultra violet and infra red radiation. Mono atomic amorphous silicon produced by quantum chemical engineering at a temperature of 20 degrees Celsius. Properties of mono atomic amorphous silicon are truly unique. Cost to automobile 1 gr. This material does not exceed $ 100. At the same time using 1 gr. mono amorphous silicon can cover 10 square meter photovoltaic plates. * extreme layer is an anti-reflecting the carbon coating. Total efficiencies achieved over 35%. If you compare the cost of Sell-based mono silicon efficiency 16% Cell produced by our technology with efficiency over 35%, our Sell more 10-15% while the efficiency of our Sell more than 2 times better. While improving the technology and equipment we can achieve efficiency of 50% and above . The characteristics of our products: Specification Dimension :156mm x 156mm ± 0.5mm Thickness :203 mc.m ± 0,5 mc.m, 180 mc.m ± 0,5 mc.m Front :2.0 ± 0.1mm busbar (silver) Silicon nitride antireflection coating Back 3.0mm continuous soldering pads (silver) Back surface field (aluminum) Efficiency - 35% Power : 6,5 watt Color uniformity A, grade In addition to the use of solar energy nanoscale mono atomic amorphous silicon and its application of our technology has great prospect of application in the electronics industry. When applying this material for silicon-based chip, we seek to increase speed and memory in the old scale of the chip. We have plans to use this technology in other areas - space, medicine .. To maintain the pace and timing of the completion of the production of industrial prototypes we raise $ 3000 000. We are interested in quickly attracting investment. SOLARUS ENERGY Ltd VLADIMIR KARASEV Email: vladimirkarasev1@gmail.com